New
Arrivals/Restock
Seco-Larm E-960-D290Q Twin Photobeam with Laser Beam Alignment, 290ft outdoors
4.0 (105 items)
Limited Time SaleUntil the end
14
57
15
$65.56 cheaper than the new price!!
Free shipping for purchases over $99 ( Details )
Free cash-on-delivery fees for purchases over $99
Free cash-on-delivery fees for purchases over $99
See all stores
Please note that the sales price and tax displayed may differ between online and in-store. Also, the product may be out of stock in-store.
New $119.20
Product details
| Management number | 205070347 | Release Date | 2025/10/16 | List Price | $53.64 | Model Number | 205070347 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors.
- Built-in laser beam alignment system speeds accurate, reliable positioning
- Twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.
- Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.
- Weatherproof (IP55), sunlight-filtering case for indoor & outdoor use
- Anti-frost system so that beam functions even in extreme conditions
- Automatic input power filtering with special noise rejection circuitry
- NC/NO alarm output
- N.C. tamper circuit included
- Non-polarized power inputs
- Quick, easy installation with built-in laser beam alignment system
- Interruption time adjustable for nearly all situations
Specifications
| Type | Twin Photobeam Detectors with Laser Beam Alignment |
| Current Draw | 74mA |
| Sensing Range | Outdoor-290′ (90m), Indoor- 590′ (180m) |
| Operating Voltage | 10~30VAC/VDC (Non-polarized) |
| IP Rating | Weatherproof IP55 |
| Interupt Speed | 50msec~700msec (variable) |
| LEDs – Red | Alarm LED (Receiver) ON: When transmitter and receiver are not aligned or when beam is broken |
| LEDs – Yellow | Tuning LED (Receiver) – ON: When receiver’s signal is weak or when beam is broken. |
| LEDs – Green | Green LED ON: Indicates connected to power |
| Detection System | Simultaneous break of 2 beams |
| Alarm Output | NO/NC relay, 1A @ 120VAC, min. 1 sec. |
| Tamper Output | NC. switch, 1A@120VAC |
| Case material | PC Resin |
| Laser Wavelength | 650nm |
| Operating Temperature | -13º~+131º F (-25º~+55º C) |
| Laser Output Power | <5mW |
| Alignment Angle | Horizontal (+/-)90º, Vertical: (+/-)5º |
| Weight | 2.5 lbs. (1.1kg) |
Troubleshooting
| Situation | Possible Issue | Solution |
| Transmitter LED does not light. | Incorrectly wired and/or insufficient voltage. | Ensure the power supply to the transmitter is 12 to 24 VAC/VDC. |
| Receiver LED never lights up when the beam is interrupted. | a. Insufficient voltage. b. Beam reflected away from receiver. c. Beams not simultaneously interrupted. |
a. Double-check the voltage. b. Clean the cover. c. Check overall installation. |
| Beams interrupted and LED lights, but no alarm trigger. | Alarm trigger cable may be cut, or the relay contact stuck due to overloading. | Check the continuity of the wiring between the sensor and the alarm |
| Alarm LED continuously lit. | a. Lenses out of alignment. b. Beams are blocked. c. Cover is foggy or dirty. |
a. Realign the lenses. b. Remove any obstacles. c. Clean the cover. |
| Alarm trigger becomes erratic in bad weather. |
Lenses out of alignment. | Check overall system installation. If still erratic, realign the lenses. |
| Frequent false triggers from leaves, birds, etc. |
a. Too sensitive. b. Bad location. |
a. Reduce the response time. b. Change the transmitter and/or location. |
Access Control Accessories
Lotion
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form